Where Can One Install Vinyl Flooring?
You can install vinyl flooring in almost any room over a lightly surfaced or porous surface or a well-bonded, solid PVC floor. Experts do not recommend installing vinyl in areas where people can expose it to long-term direct sunlight, like in sunrooms or solariums. It offers good grips and solid surfaces, so it is suitable for kitchen and bathroom flooring and hospital use PVC flooring.
Can You Install Vinyl Flooring Over Concrete?
You may install vinyl flooring over concrete that has cured for a minimum of 60 days before floor installation. You cannot install glue down, peel and stick products on below-grade concrete surfaces where moisture is a problem.
Can You Install Vinyl Flooring Over Wood, Particleboard, Plywood, Or Chipboard?
You can install vinyl flooring over wood floors to put a plywood subfloor on top of the surface. You cannot install glue down and stick products over particleboard, chipboard, or an embossed base. You cannot install peel and stick products over Lauan decorative plywood.
Can You Install Vinyl Flooring Over Radiant Heating?
You can install most vinyl flooring over electric or hydronic radiant heated floors, with the omission of peel and stick or self-locking products. You can glue it down moveable lay vinyl flooring if you have a radiant heated floor. That’s why it is suitable flooring for kitchen and hospital PVC flooring.
What Should You Do Before Installing Vinyl Flooring?
Inspect vinyl pieces for defects below good light conditions. You cannot install damaged planks. You can leave the cartons closed, let your vinyl flooring sheet acclimate in a horizontal position for 48 hours before sheet installation. You can hire engineered vinyl; it only needs to adjust to room temperature.
You may need a saw, utility knife, spacers, tape measure, pencil, ruler, and safety goggles. If you are installing glue down, you will also want flooring adhesive. Ensure the floor is smooth, grease, clean, free of wax, oil, or dust, and sealed as essential before laying vinyl.
When vinyl installing click and self-locking products, try ticking together some pieces while examining the profile in good light. It will help you understand how the pieces fit together and make it easier for you to install your final vinyl floor.